Jump to content

File:Uniaxial.png

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (800 × 2,000 pixels, file size: 26 KB, MIME type: image/png)

This diagram image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}.


It is recommended to name the SVG file “Uniaxial.svg”—then the template Vector version available (or Vva) does not need the new image name parameter.

Summary

Source code

Instructions: on a system with a modern TeTeX or similar installed save the following two files, then run

mpost uniaxial && pdftex uniaxial

You will then need to use ghostscript or similar to make a raster image out of the pdf.

Source code author: en:user:AndrewKepert

Source code license: GPL

 
This PNG graphic was created with MetaPost.

Source code

InfoField

PostScript code

picture pic[];
 pair pt[],pt[]n,pt[]e,pt[]w,pt[]s,pt[]ne,pt[]nw,pt[]se,pt[]sw;
 pair ux,uy,uz;
 path unitcircle; unitcircle=fullcircle scaled 2;
 boolean front[];
 color colour[];
 path p[];
 
 u=16;
 ux=.4*down*u;
 uy=right*2u;
 uz=up*.5u;
 
 transform xyplane[];
 (0,0) transformed xyplane0 = (0,0);
 (1,0) transformed xyplane0 = ux;
 (0,1) transformed xyplane0 = uy;
 for i = -1 step 1/16 until 1:
     xyplane[i]=xyplane[0] shifted (i*uz);
 endfor
 
 theta=10;
 alpha=8;
 
 N:=6;
 
 for i = -1 step .5 until N+1:
     pt[i]   = right rotated  theta        rotated (360i/N) transformed xyplane0;
     front[i]= ypart pt[i] < ypart xyplane0;
     pt[i]e  = right rotated (theta+alpha) rotated (360i/N) transformed xyplane0;
     pt[i]w  = right rotated (theta-alpha) rotated (360i/N) transformed xyplane0;
     pt[i]n  = right rotated  theta        rotated (360i/N) transformed xyplane[.75];
     pt[i]ne = right rotated (theta+alpha) rotated (360i/N) transformed xyplane[.75];
     pt[i]nw = right rotated (theta-alpha) rotated (360i/N) transformed xyplane[.75];
     pt[i]s  = right rotated  theta        rotated (360i/N) transformed xyplane[-.75];
     pt[i]se = right rotated (theta+alpha) rotated (360i/N) transformed xyplane[-.75];
     pt[i]sw = right rotated (theta-alpha) rotated (360i/N) transformed xyplane[-.75];
 endfor
 
 t0=directiontime uz of (unitcircle transformed xyplane0);
 t1=directiontime -uz of (unitcircle transformed xyplane0);
 t2=t0+length unitcircle;
 
 path backface,frontface;
 backface:=(subpath (t0,t1) of unitcircle transformed xyplane[1])
         -- (subpath (t1,t0) of unitcircle transformed xyplane[-1])
         -- cycle;
 frontface:= (subpath (t1,t2) of unitcircle transformed xyplane[1])
         -- (subpath (t2,t1) of unitcircle transformed xyplane[-1])
         -- cycle;
 
 colour0:=(.8,.85,1);
 colour1:=.8[black,colour0];
 colour2:=.6[black,colour1];
 
 def constructribbon(expr delta)=
     % stuff on back face
     pic1:=image( for i = 0 step delta until N-eps: if not front[i]: fill p[i]; fi endfor
         fill (subpath (t0,t1) of unitcircle transformed xyplane[1/16])
         -- (subpath (t1,t0) of unitcircle transformed xyplane[-1/16])
         -- cycle;);
     % stuff on front face
     pic2:=image( for i = 0 step delta until N-eps: if  front[i]: fill p[i]; fi endfor
         fill (subpath (t1,t2) of unitcircle transformed xyplane[1/16])
         -- (subpath (t2,t1) of unitcircle transformed xyplane[-1/16])
         -- cycle;);
     % all of back face
     pic0:=image(fill frontface withcolor colour0;
         fill backface withcolor colour1;
         draw pic1 withcolor colour2);
     fill backface withcolor colour0;
     fill frontface withcolor colour0;
     draw pic1;
     clip pic0 to frontface;
     draw pic0;
     draw pic2;
     draw unitcircle transformed xyplane[1] withpen pencircle scaled 0.2 withcolor colour1;
     draw subpath (t2,t1) of unitcircle transformed xyplane[-1] withpen pencircle scaled 0.2 withcolor colour1;
 enddef;
 
 beginfig(1)
     for i=0 upto N-1:
         p[i]:= pt[i]--pt[i]w--pt[i]ne--pt[i]e--cycle;
     endfor
     constructribbon(1);
 endfig;
 
 beginfig(2)
     for i=0 upto N-1:
         p[i]:=  pt[i]w--pt[i]ne--pt[i]se--cycle ;
     endfor
     constructribbon(1);
 endfig;
 
 beginfig(3)
     for i=0 upto N-1:
         p[i]:= pt[i]--pt[i]e--pt[i]n--pt[i]w--cycle ;
     endfor
     constructribbon(1);
 endfig;
 
 beginfig(4)
     for i=0 upto N-1:
         %p[i]:=  pt[i]--pt[i]ne--pt[i]e--pt[i]--pt[i]sw--pt[i]w--cycle ;
         p[i]:=          pt[i]ne--pt[i]e--       pt[i]sw--pt[i]w--cycle ;
     endfor
     constructribbon(1);
 endfig;
 
 beginfig(5)
     for i=0 upto N-1:
         p[i]:=  pt[i]n--pt[i]e--pt[i]s--pt[i]w--cycle ;
     endfor
     constructribbon(1);
 endfig;
 
 beginfig(6)
     for i=0 upto N-1:
         p[i]:=  pt[i]--pt[i]e--pt[i]n--pt[i]w--cycle ;
         p[i+.5]:=  pt[i+.5]--pt[i+.5]e--pt[i+.5]s--pt[i+.5]w--cycle ;
     endfor
     constructribbon(1/2);
 endfig;
 
 beginfig(7)
     for i=0 upto N-1:
         if odd i:
             p[i]:= pt[i]--pt[i]w--pt[i]ne--pt[i]e--cycle;
         else:
             p[i]:= pt[i]--pt[i]w--pt[i]se--pt[i]e--cycle;
         fi
     endfor
     constructribbon(1);
 endfig;
 
 
 bye

Data

\input supp-pdf
 {\tabskip=5pt  \lineskiplimit=5pt  \lineskip=\lineskiplimit
 \halign{\hfil#\hfil&\hfil$\vcenter{\convertMPtoPDF{#}{1}{1}}$\hfil\cr
     $C_6$&uniaxial.1\cr
     $C_{6h}$&uniaxial.2\cr
     $C_{6v}$&uniaxial.3\cr
     $D_6$&uniaxial.4\cr
     $D_{6h}$&uniaxial.5\cr
     $D_{6d}$&uniaxial.6\cr
     $S_6$&uniaxial.7\cr
     }
 }
 \bye

Licensing

I, the copyright holder of this work, hereby publish it under the following licenses:
GNU head Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This licensing tag was added to this file as part of the GFDL licensing update.
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 2.5 Generic, 2.0 Generic and 1.0 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
You may select the license of your choice.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:28, 5 July 2006Thumbnail for version as of 08:28, 5 July 2006800 × 2,000 (26 KB)AndrewKepert~commonswikiAuthor: user:en:AndrewKepert Toolchain: MetaPost and TeX. Source: will be uploaded Description: Illustration of a typical member of each of 7 infinite families of 3D point groups. Destination: en:Point groups in three dimensions. Permission: GF

The following page uses this file:

Global file usage

The following other wikis use this file: