Jump to content

Lancer 29 Mark III

From Wikipedia, the free encyclopedia
(Redirected from Lancer 29-3)

Lancer 29 Mark III
Development
DesignerC&C Design
LocationUnited States
Year1977
Builder(s)Lancer Yachts
RoleCruiser
NameLancer 29 Mark III
Boat
Displacement7,800 lb (3,538 kg)
Draft5.17 ft (1.58 m)
Hull
Typemonohull
Constructionfiberglass
LOA28.67 ft (8.74 m)
LWL23.50 ft (7.16 m)
Beam10.00 ft (3.05 m)
Engine typeYanmar 8 to 15 hp (6 to 11 kW) diesel engine/outboard motor
Hull appendages
Keel/board typefin keel
Ballast3,000 lb (1,361 kg)
Rudder(s)skeg-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height35.00 ft (10.67 m)
J foretriangle base12.83 ft (3.91 m)
P mainsail luff30.00 ft (9.14 m)
E mainsail foot10.00 ft (3.05 m)
Sails
Sailplanmasthead sloop
Mainsail area150.00 sq ft (13.935 m2)
Jib/genoa area224.53 sq ft (20.860 m2)
Total sail area374.53 sq ft (34.795 m2)

The Lancer 29 Mark III, also called the Lancer 29-3, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1977. In 1982 the boat was renamed the Lancer 30.[1][2][3]

The Lancer 29 Mark III is thought to have been built using the molds for the C&C 30, hence the design credit to C&C Design. There was no Lancer 29 Mark I or II, but the C&C 30 was produced in Mark I and Mark II versions.[1][3][4][5]

The Lancer 29 Mark III is sometimes confused with the unrelated Lancer 29 PS power sailer.[1][3]

Production

[edit]

The design was built by Lancer Yachts in the United States from 1977 until 1981, but it is now out of production.[1][3][6]

Design

[edit]

The Lancer 29 Mark III is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a plumb transom, a skeg-mounted rudder and a fixed fin keel. It displaces 7,800 lb (3,538 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]

The boat has a draft of 5.17 ft (1.58 m) with the standard keel and 4.17 ft (1.27 m) with the optional shoal draft keel.[1][3]

The boat may be optionally fitted with a Japanese Yanmar diesel engine of 8 hp (6 kW), 12 hp (9 kW) or 15 hp (11 kW), or a 15 hp (11 kW) gasoline engine for docking and maneuvering. It could also be equipped with a small, well-mounted outboard motor.[1][3]

Cabin headroom is 72 in (183 cm). The fresh water tank has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]

The design has a hull speed of 6.49 kn (12.02 km/h).[3]

See also

[edit]

Related development

References

[edit]
  1. ^ a b c d e f g h McArthur, Bruce (2020). "Lancer 29-3 sailboat". sailboatdata.com. Archived from the original on 30 June 2021. Retrieved 30 June 2021.
  2. ^ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. Archived from the original on 1 March 2021. Retrieved 30 June 2021.
  3. ^ a b c d e f g h i Sea Time Tech, LLC (2022). "Lancer 29-3". sailboat.guide. Archived from the original on 18 April 2022. Retrieved 18 April 2022.
  4. ^ McArthur, Bruce (2020). "C&C 30-1 (1-506)". sailboatdata.com. Archived from the original on 30 June 2021. Retrieved 30 June 2021.
  5. ^ McArthur, Bruce (2020). "C&C 30-2". sailboatdata.com. Archived from the original on 30 June 2021. Retrieved 30 June 2021.
  6. ^ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Archived from the original on 20 June 2021. Retrieved 30 June 2021.