Great Cobar mine

Great Cobar mine was a copper mine, at Cobar, New South Wales, Australia, that also produced significant amounts of gold and silver. It operated between 1871 and 1919. Over that period, it was operated by five entities; Cobar Copper Mine Company (1871-1875); Great Cobar Copper-Mining Company (1876-1889), Great Cobar Mining Syndicate (1894-1906), Great Cobar Limited (1906-1914), and finally the receiver representing the debentures holders of Great Cobar Limited (1915-1919). Its operations eventually included mines and smelters, at Cobar, an electrolytic copper refinery, coal mine and coke works, at Lithgow, and a coal mine and coke works at Rix's Creek near Singleton.

Discovery

In the winter of 1870, three well and bore sinkers, Hartman, Campbell (a.k.a. Kempf) and Gibb, with two Aboriginal guides, 'Boney' and 'Frank', were heading south, following a route between waterholes that were known to the guides. Camping overnight at the Kuppar waterhole, 100 miles south of Bourke, they noticed blue and green streaks in rocks near the waterhole. They took samples, from an outcrop of what was later the Great Cobar lode. At Gilgunnia, they showed those samples to Sidwell Kruge—a woman of Cornish origin, previously residing in the South Australian copper-mining town of Burra—who identified the ores as containing copper. Sidwell's husband Henry Kruge, smelted some of the ore samples in a blacksmith's forge to prove beyond doubt that the ore contained copper.

Cobar Copper Mine Company (1871-1875)

The first owners of the mine were the three discoverers and four men from Bourke, Joseph Becker, William Bradley, Russell Barton and James Smith. They called their new venture Cobar Copper Mine Company.

The owners brought Thomas Lean in to manage the venture. He was an experienced mine captain from South Australia's 'copper triangle'. Impressed with the deposit, he brought experienced copper miners, from South Australia, and sunk two shafts (Becker shaft and Barton shaft, 600 feet to the south). The rich ore (30% copper) was taken to Louth to await transport by riverboat, to smelters in South Australia, when water depth allowed it. Lower grade ore (15% copper) was stockpiled at the mine, pending the erection of smelters. Six reverberatory furnaces were constructed, two in 1875 and another four in 1876.

After the initial discovery, from 1870 to 1873, other prospectors made other discoveries in the area, including those that became the North Cobar and South Cobar mines, as well as the deposit to the north, the C.S.A. mine, and to the south in the area that would later become Wrightville. The township of Cobar began to become a more permanent settlement.

Great Cobar Copper-Mining Company (1876 - 1889)

At the end of 1875, the Cobar and South Cobar companies were amalgamated into one entity, which was registered as the Great Cobar Copper-Mining Company in January 1876, aiming to expand the mine and lift production. In 1877, James Dunstan was appointed as the manager of the newly amalgamated Great Cobar operation.Two more reverberatory furnaces were erected in 1878.

Production grew steadily. Comparing half-year periods, to January, copper production was 268 tons to January 1878, 868 tons to January 1879, 1,016 tons to January 1880, and 1,388 tons to January 1881. By mid 1881, five shafts had been sunk, aligned south to north as follows; Renwick's (or south shaft) depth 54 fathoms (324 feet); Hardie's shaft depth 39 fathoms; Barton's shaft (the most productive shaft) depth 54 fathoms; Bradley's shaft (an access shaft) depth 25 fathoms (150 feet); and Becker's shaft (the northernmost shaft) depth 54 fathoms.

Great Cobar Copper Mine - c.1890 Barton's shaft and elevated tramway to smelters, most likely taken toward the end of the Company's operations.

In 1879, the mine began to use a narrow-gauge tramway to move ore from the mine to the furnaces. The tramway was elevated and ran across a massive wooden trestle bridge structure, around a quarter of a mile long, which ran from Barton's shaft to the smelter. Photographs of the time show that it was manually operated.

By mid 1881, the mine had a weekly pay roll of £1,700 to £1,800 per week and a workforce of around 650. There were 170 miners, 125 smelter workers, about 150 wood-carters, and around 205 others (ore-dressers, brickmakers, tank-sinkers, and other mine employees).

The mine drew its water from a dam (referred to as a 'tank'), to east of the mine. The difficulties of Cobar's remote location and its semi-arid environment soon became apparent. The absence of rainfall also meant that residents of Cobar sometimes needed to buy their water, which came from other areas by the tank load. Copper was being shipped from Bourke, only when water levels in the Darling would allow steamboats to come up the Darling River. The alternative was to carry the copper to the nearest railhead, originally Orange later Nyngan.

The furnaces required vast amounts of wood as fuel. During the early 1880s, a second tramway network was commenced, to bring firewood from further away, but was only officially authorised in 1884. The plants fourteen furnaces consumed 70,000 tons of firewood annually, of which 62,000 tons came via the tramway and the remaining 8,000 tons by bullock drays. By 1889, the steam-operated tramway extended to the east and south-east, allowing access to large stands of trees.

Although Great Cobar was classed as a low-grade copper deposit, ore mined in the 1880s graded up to 7% copper.

As the Great Cobar mine followed the copper lodes deeper, it produced more sulphide ore. Dunstan introduced open-air ore roasting, in 1883. The sulphide ore was roasted in open heaps, placed atop a layer of wood that was then fired. The roasting process drove off the sulphur as noxious sulphur dioxide fumes, leaving behind oxides of copper. The roasting heaps were situated south-east of Cobar township, so that the fumes would generally be blown away from the town.

A metallurgical engineer, Claude Vautin, demonstrated a water jacket furnace and convertor to the company, in 1884. Sulphide ores did not need prior roasting, when smelted in such a furnace. However, such furnaces needed coke. With the closest railway being at Nyngan, the road freight cost of moving coke from there to Cobar, made water jacket furnaces uneconomic.

The wild copper price fluctuations of 1887 to 1889.

In 1885, James Dunstan was replaced as manager by R.N. Williams. Copper prices were falling and costs needed to be reigned in to keep the operation profitable. Further, years of firewood harvesting was beginning to denude the plains in a wide area surrounding Cobar. It became clear that Cobar would become non-competitive, if it did not have a railway connection, allowing coke to be brought in economically. The Nyngan to Cobar Railway Bill was passed in 1886, but the railway was still some years away. Another railway act was passed, in 1890, actually authorising work on the railway to commence.

The temporary increase in copper prices in 1888—Pierre-Eugène Secrétan, manager of Société des Métaux attempted to manipulate the international copper market in that year—was not sufficient to keep the mine working, once the copper price collapsed in 1889. The mine was idle from August 1889.

Great Cobar Mining Syndicate (1894-1906)

The syndicate

Three of the Great Cobar Mining Syndicate (c.1901). Left to right: William Longworth, Dr Richard Read, and Thomas Longworth

The next phase of the mine's development and operation is associated with two brothers, William Longworth (1846—1928) and Thomas Longworth (1857—1927) and their syndicate partners, in particular Dr Richard Read (c.1848—1920).

After the death of their father in a mining accident, in 1884, the two Longworth brothers became joint owners of a small coal mine at Rix's Creek, near Singleton, in the Upper Hunter Valley. Their neighbour was Dr Richard Read, a Singleton medical practitioner, who also owned another small coal mine. Originally, fierce competitors, they joined forces after Read, won a contract but could not mine enough coal to supply it.

Taking an additional partner, Albert Gould, they expanded their coal mines and built coke ovens, under the business name of the Singleton Coal and Coke Company. Around 1890, the partners became interested in the then idle Great Cobar mine, initially as an outlet for their coke, retaining as their advisor the mine's ex-manager, James Dunstan. Dunstan had been mine manager at the time of the successful demonstration of a water jacket furnace and convertor at Cobar, in 1884.

The completion of a railway line to Cobar in 1892, made it feasible to bring coke from Rix's Creek to Cobar. Coke would allow use of water jacket furnaces, a type of blast furnace used for non-ferrous metal smelting, in place of the less efficient, wood-fuelled reverberatory furnaces that had been used up to that time. The change would reduce costs and be critical to unlocking the potential of the mine, even at lower prevailing copper prices.

The partners began negotiations to operate the mine on tribute and, with Albert Dangar and W. W. Robinson, the Longworths' brother in law, formed the Great Cobar Copper Mining Syndicate in 1894. The syndicate was sometimes referred to as 'the Longworth syndicate' or 'the Read-Longworth syndicate'.

Tribute agreement

In January 1894, the Great Cobar Copper Mining Syndicate took over the management and operation of the Great Cobar Mine, under a tribute agreement. The Great Cobar Copper Mining Company still owned the mining leases, and would do so until December 1900.

While their mine was being worked on tribute by the syndicate, the Great Cobar Copper Mining Company—taking no active role in the mine or the sale of its copper—received a royalty payment, which it used to pay a dividend to its shareholders. The royalty paid by the Syndicate was on a sliding scale; 5%, while the price of copper in London was £45 or less per ton, and 7.5% for prices more than £45 but less than £50. For prices above £50, in addition to 7.5%, the company received 8 shillings for every pound increment of price above £50. In addition to the royalty, there was a minimum rental of £500 per annum and a minimum output of 50 tons of ore per day.

In time, the shareholders of the Great Cobar Copper Mining Company were also to benefit greatly from the decision of the Syndicate not to include, in the tribute agreement, an option to purchase the mine for £40,000. That option had been offered by the company and, in hindsight, forgoing it was a costly missed opportunity for the syndicate. However, at the time of the agreement, it seems that the Syndicate did not envisage that they later would purchase the assets.

Great Cobar Copper Mining Syndicate took an advantage from another circumstance; the copper from Cobar contained around two ounces of gold per ton of copper. Unlike copper, the gold price was absolutely stable, being defined by the gold standard. At low copper prices, the value of the gold well exceeded that of the royalty. Even at high copper prices, the value of the gold contributed a significant amount of the royalty payment. When the buoyant copper price reached £72 per ton in 1898, the royalty calculation was a massive £14 4s. per ton. However, at that copper price, the mine was highly profitable. It has been estimated that, although the syndicate paid £60,000 in royalties, its profit was around £150,000.

Operations under tribute agreement (1894 - 1900)

Operations at Cobar

Water jacket furnaces in foreground, old reverberatory furnaces in background (c.1895)

Thomas Longworth relocated to Cobar to manage the operations there. By 1898, there were five water jacket furnaces.

The syndicate built a narrow-gauge industrial tramway within the plant for moving ore, coke, and slag within the mine and smelter site. Initially, coke from Rix's Creek was unloaded at Cobar railway station and then taken from there to a coke dump by carriers. In 1897, a short standard gauge branch line, the Copper Mine Branch, allowed coke to be off-loaded at the Great Cobar coke dump, and the copper matte to be loaded for Lithgow.

The water jacket furnaces produced copper matte. Initially, a portion of the copper matte was refined in the old reverberatory furnaces at Cobar, with the reminder being sent to be refined in Newcastle. The syndicate seems to have considered adding converters, at Cobar, which would have converted the matte to blister copper; due to the prevailing low price of copper, that path was not taken.

Instead, by the end of 1896, construction was well advanced on a copper refining plant at Lithgow. By early 1897, the Lithgow plant had seven reverberatory furnaces and one furnace described as a 'refining furnace'.

The Great Cobar ore and copper matte included significant amounts of gold and silver. The Syndicate announced that they would build an electrolytic copper refinery at Lithgow, in late 1899. The new electrolytic refinery, which seems to have opened in 1900, allowed the precious metal content to be recovered, while simultaneously upgrading the crude copper produced at the Cobar smelters. William Longworth took charge of this part of the venture, together with the Great Cobar colliery, which was established to supply the refinery with coal to generate the electricity it needed. Great Cobar became a significant producer of gold and silver. The Lithgow plant also processed copper matte from Nymagee, another mine which the members of the syndicate owned.

• 
  Panoramic view - Left (1895)
• 
  Panoramic view - Right (1895)
• 
  Miners working a 70 foot wide lode, c.1899.
• 
  Stope, with compressed air drills in use (1899)
• 
  Smelter workers at 80 ton water jacket furnace, c.1899.
• 
  Casting ingots at Lithgow refinery (1899)

Electrolytic refining at Lithgow

Lithgow became a copper refining centre, driven largely the presence of cheap fine coal, which could be used in reverberatory furnaces and later to generate the electricity needed for electrolytic refining. The first Lithgow copper venture was a smelter and refinery there, owned by Lewis Lloyd.

Lithgow refinery (1899)

The copper matte (later also blister copper) from Cobar was first melted and further refined in the anode refinery furnace, to around 99.4% copper. The molten copper was then ladled into anode moulds. The cast copper anodes were then taken to the electrolytic part of the refinery, which consisted of 140 insulated tanks, each with an anode and cathode. Direct-current was applied across the anode and cathode, and the copper in the anode was redeposited onto the thin copper cathode, while the other metals and compounds (mainly gold, silver, arsenic, bismuth, and antimony) settled, with some copper, as a greenish-black sludge in the bottom of the tank. The copper cathodes were then melted and cast into ingots of refined copper.

The valuable sludge from the tanks was boiled in sulphuric acid to remove residual copper. What remained in solid form was then melted in a cupel furnace, after adding some silica sand and sodium carbonate, and cast into small ingots. Those ingots, known Dore bullion, consisted of a mixture of gold and silver, which were later separated into pure gold and silver, by electrolysis.

Purchase of the mine

The tribute agreement was due to expire in 1900, but was extended. The Great Cobar Mining Company granted the Syndicate an option to purchase the Great Cobar mine and its other properties, for a sum of £500,000, up to 15 June 1902. If the option was exercised before that date, the Syndicate would be compensated, by adjusting the purchase price, for the shortening of the term of the tribute agreement, at a rate of £90,000 for each year lost.

With copper prices around £70 per ton, the syndicate bought the mine outright, taking ownership on 12 December 1900, ending the tribute agreement and thereby eliminating the royalty payments. The purchase price was around £315,000, but it seems that the payment was spread over several years. Although much more costly than the forgone purchase option of 1894, at prevailing copper prices, it seemed a reasonable price.

The crisis of 1902 and option to buy

Soon after the purchase, copper prices fell, putting the Lithgow operations in jeopardy. By the end of 1901, it had fallen to only £48 per ton, close to the limit of economic production, at Cobar, which Richard Read stated was £45 per ton. The situation was described as 'hopeless'. Cobar was a distant victim of a copper market manipulation by the Amalgamated Copper Company, which was attempting to force down the copper price, to drive smaller producers out of the market.

The Federation Drought badly affected Cobar. To prevent the closing of the operations and 600 men losing their jobs, the syndicate persuaded the railway commissioners to supply water by train from Warren, on Macquarie River, during the worst seven months of 1902, and also to reduce rail freight rates, in 1903, due to low copper prices. Water trains carrying around 26,000 gallons of water ran several times per week, and were emptied into the Great Cobar's water 'tank', actually a type of excavated dam.

The situation was so dire that other mines in the area, notably the Chesney Mine, ceased operating in 1902. Fortunately, good rains in November 1902 ended the drought in the Cobar region.

It is likely that the difficult situation from 1900 to 1903 gave the syndicate the impetus to sell its copper business, if a good price for the assets could be obtained. Various transactions were initiated, but none proceeded to completion. In a move that was to have further consequences, an option to purchase the assets was granted to a syndicate of London investors, headed by A.S Joseph. As a consequence of the negotiation of the option, the assets were valued at £1,006,000. Given the risk to their own money tied up in an asset subject to large fluctuations in the copper price, as typified by the 1902 crisis, and a significant paper capital gain, the Syndicate were likely sellers at that valuation, but the option lapsed.

George Blakemore

In 1901, George Blakemore became mine manager of the Great Cobar Mine, and became its general manager in 1905. He would remain its general manager, until early 1909.

His career began in Broken Hill, in 1888. He was then in charge of the erection and operation of the plant of the Smelting Company of Australia, at Dapto, until 1898. He later was in charge of gold mines at Gundagai, N.S.W., and Einasleigh Copper Mine and Smelter in Queensland. In 1901, George Blackmore became mine manager of the Great Cobar Mine, later becoming its general manager, in 1905.

Blakemore had a grand vision for the Great Cobar, involving a new shaft and a huge expansion of the smelter, and greatly increased production. Although the new shaft would not be completed under Syndicate management, nonetheless, the years of Blakemore's management would see an expansion of the Great Cobar's operations.

In the last years of the Great Cobar's ownership by the Great Cobar Mining Syndicate, there were reports of attempts to sell the Great Cobar, but no sale was completed. If such a sale were to take place, the rewards for the Great Cobar Mining Syndicate members would be immense. It was well known that the syndicate intended to sell the Great Cobar.

Directors of C.S.A. Mines Limited, c.1912. George Blakemore is seated in the centre. From 1905 to 1909, the general manager of Great Cobar; by 1916, he had become its nemesis.

In 1905, Blakemore, probably attempting to emulate the success of the Great Cobar Mining Syndicate, established the C.S.A. Development Syndicate, to take over the then moribund C.S.A. Mine. Exploration work at the C.S.A. Mine soon revealed a sizable lead-zinc deposit, and a new company C.S.A. Mines Limited was floated. The members of the C.S.A. Development Syndicate, including Blakemore received a large proportion of the shares in the new company. Blakemore was a director of that new company's board, and another member of that first board was Dr Richard Read, a member of the Great Cobar Mining Syndicate.

When the Great Cobar Mine was sold to new owners in 1906, Blakemore stayed on as its General Manager. Blakemore was dismissed from his position at Great Cobar, in 1909. He remained in the region and became a vocal critic of Great Cobar's operations and management.

In late 1910, a large lode of copper ore was identified in the C.S.A. Mine. It joined with the neighbouring Tinto Mine, in 1912, emerging for the first time as a major mine in the Cobar region.

Probably his last involvement with mining in the Cobar region was as a member of the board of New Occidental Gold Mining Company Limited, operators of the New Occidental Mine at Wrightville. He joined the board in 1936.

Further expansion (1901-1905)

Robert Sticht of the Mt Lyell Mining and Railway Company, in Tasmania, had successfully achieved fully pyritic smelting of copper ore. Pyritc smelting used the sulphur in the chalcopyrite ore as fuel, in a water-jacket furnace, with cold blast. Not only did it remove the need to roast the ore prior to smelting but the ore was smelted without any coke. To improve the reliability of the process, Stitcht did use a little (1%) coke in the furnace feed. Stichts' achievement—after about six years of incremental progress—may not have been truly a world first or even the first in Australia, but it was very influential, especially for mines with similar chalcopyrite ore, such as Great Cobar.

George Blakemore designed an experimental furnace, based on similar technology to Mt Lyell. The furnace was successfully commissioned in November 1902, with a capacity to smelt 200 tons of ore per day, increasing to 340 tons per day in 1903. Cobar would only achieve partial pyritic smelting, but the new furnaces improved the economics of the operation greatly, particularly by eliminating the need to roast the ore prior to smelting and reducing the amount of coke used.

The Syndicate built two large water-jacket furnaces, based on the Mount Lyell designs, one in 1903 and another in 1905. These were capable of smelting 400 tons of ore per day. The experimental furnace was re-erected at a different location in 1905, providing three modern large furnaces. The 80 ton water-jacket furnaces and old reverberatory furnaces were demolished.

Chesney Mine (1899)

In 1901, a longer branch railway line was opened, from a junction on the Copper Mine Branch near Cobar to the Occidental Mine at Wrightville. Called the Peak Branch, it would never be extended to the Peak mine, as was originally planned. The Peak Branch had sidings at the Great Cobar mine (the rest of the old Copper Mine Branch) and Chesney Mine, allowing ore from the Chesney Mine to be carried to the Great Cobar smelters more readily. This was an important development, because the low-grade 'basic' copper ore from the Chesney mine could be used as a flux when smelting the 'silicaceous' ore of the Great Cobar, improving the economics of the smelting operation by reducing the amount of limestone needed. This idea probably also had been taken from Mt Lyell, because the 'siicaceous' ores of the North Mount Lyell mine had been combined with the 'basic' ore of the Mt Lyell mine, for a similar purpose.

In 1904, the syndicate bought the Chesney Mine—initially a gold mine but, as the depth increased, increasingly a copper mine— and they had owned the Nymagee Copper Mine, since 1896, and the Peak Gold Mine, since at latest 1898.

• Great Cobar in 1905
• 
  Left side of panoramic view of Great Cobar (1905).
• 
  Right side of panoramic view of Great Cobar (1905)
• 
  Tramway from crusher bins to furnace ore bins (1905)
• 
  Narow-gauge tramway over ore bins at furnaces (1905)
• 
  Pouring slag at water jacket furnace (1905)
• 
  Copper matte awaiting shipment to Lithgow (1905)

Sale and aftermath

William Longworth retired as the managing director of the Syndicate in early 1905, and his replacement in that role was Dr Richard Read. By this time the negotiations to sell the assets were well advanced. The prospective buyers were the same London investors, headed by A.S. Joseph, who had previously held the option to buy the assets that was granted in 1902. Both parties were aware of the 1902 valuation of the assets at £1,000, 060.

In 1906, the Syndicate sold to the promoters of an English firm, Great Cobar Ltd, for £800,000, in cash, that was divided among the six principals. The sale did not include the Nymagee Copper Mine, which was sold to other English investors in 1907. Also in 1906, the former owner of the Great Cobar, the old Cobar Copper-Mining Company, completed its liquidation and winding up.

The principals of the Syndicate then set up Australian Woollen Mills, in 1908, and made a second fortune, especially by making khaki uniforms for the Australian Army during the First World War. Thomas Longworth was the chairman and William Longworth was a director. All the principals became very wealthy by the standards of their day. At their deaths, the estates of both Longworth brothers and of Albert Dangar each were in excess of £300,000, and that of Dr Richard Read over £136,000.

Thomas Longworth bought Woollahrah House, a very large estate on land now comprising some of the most desirable harbourside real estate in Sydney's Eastern Suburbs. He lived there until his death in 1927, after which the house was demolished and the land was sub-divided. The gatehouse of the estate survives, as Rose Bay police station. One of his sons was William (Bill) Longworth (1892–1969), later a prominent businessman, but was, as a young man, a competitive swimmer who completed at the 1912 Olympic Games (qualifying for but missing the 100m final and 1500m semi-finals due to illness). He was an early exponent of the freestyle swimming technique known as the 'Australian crawl'.

Both brothers owned steam yachts. Thomas's was Cobar, and William's was Ena, which survives as a rare example of this type of vessel.

Great Cobar Limited (1906 - 1914)

New owners

In the two decades prior to the outbreak of the First World War, British investors were seeking opportunities, outside the United Kingdom. The purchase of the Great Cobar was one of a number of large investments made in Australia, which involved purchase of existing assets, with the aim of improving or expanding those assets. Such investments, in New South Wales, included British Australian Oil Company, Commonwealth Oil Corporation, Mount Boppy Gold Mine, and the Prince of Wales Mine. A few, such as the Sons of Gwalia mine in Western Australia, were long-lived, fabulous earners, and others like the Mount Boppy were highly remunerative. However, some eventually were financially unsuccessful, some were also heavily over-capitalised, and some were ill-conceived from the outset; all three would be the case for the new company, Great Cobar Limited.

Great Cobar Limited was registered in England, in 1906, to take over and operate the assets of the Great Cobar Mining Syndicate. 150,000 new £5 shares and £750,000 in 6% debentures were authorised, being new share capital and debenture debt in a capital structure totalling £1,500,000; not all of this amount was issued at the time.

On 15 May 1906, the promoters of the new company, in the name of Mr. Hugh Woolnor, a London stockbroker, bought assets from the Great Cobar Mining Syndicate, for £800,000, in cash. The assets acquired included the refinery at Lithgow, the coal mine and coke works at Rix's Creek (near Singleton), the Chesney Mine (south of Cobar, at Wrightville), the Peak Gold mine (south of Wrightville), and the Conqueror Gold Mine (a small mine, due east of the Peak and south-east from Cobar), but not the Nymagee Copper Mine, which later would be bought by different English investors.

The assets were then sold into the float of Great Cobar, at a valuation of £1,000,000, including a payment made to Woolner of £800,000 in cash, with the rest in a mixture of fully-paid shares or debentures, resulting in a profit for the company's promoters of £200,000, in just six days. In the early days of the company, such an effective dilution of value was of no concern to its shareholders; the share price soon reached £11, and Great Cobar's market value was over £2,000,000.

Even at the time of the floating of the new company, the large cash payment to the vendors, the Great Cobar Mining Syndicate, raised concerns. If the mine had such good prospects, it seemed illogical that the Syndicate would not retain an interest by taking some of the payment in shares in the new company. The no-risk profit made by the new company's promoters, in just six days, at the time of the float, was also of concern. That the mine had already been producing for some thirty years, by 1906, also should have raised some concerns about its remaining economic life. However, although it was unforeseen at the time, it was the large issue of debenture debt that would come to burden the venture and—despite its becoming profitable, in terms of gross profit—would reduce net profits to an extent that precluded payment of dividends to shareholders.

Another controversial aspect was that the consultant engineers, who had reported favourably on the mine for the prospectus, Kendall and Barnett, received a large payment of £5,000 and 1,700 fully-paid shares (worth £8,500 at the time of the float). A principal of that firm, John Kendall, would later play an important role, during the early years of Great Cobar's ownership of the mine. He became the company's managing director, but ceased to be connected with the company, from June 1909. The other principal, W. J. Barnett, was a director of Great Cobar Limited, right to its end.

By mid 1908, with the shares trading at £6½, some were drawing attention to the problems of the financial structuring of Great Cobar Limited, particularly the impact of asset dilution and debenture interest payments, and advising investors to sell the stock. The Chairman of the company's Board of Directors, Andrew Haes, it was revealed, had been a director of a number of failed or unprofitable listed companies.

Hugh Woolner

Hugh Woolner (1866-1925) was a principal of a London stockbroking firm, Woolner and Company. He was the son of renowned sculpture, Thomas Woolner. among whose works is the statue of James Cook, in Hyde Park, Sydney.

Woolner and Company had “incurred heavy losses through the default of clients, falling markets and the stagnation of business due to the South African war.” By the end of 1904, the firm was insolvent, but continued trading, illegally.

Woolner acted as the buyer, when the Great Cobar assets were purchased in May 1906, before selling the assets into the float of Great Cobar Limited, six days later. Possibly, it was this deal that rescued Wollner from financial disaster. However, a later involvement in trading of Great Cobar shares would be his undoing.

In April 1907, he accepted an order from a 'Mr Nassif', ostensibly a principal of the New York firm Montmorency & Co., to purchase two parcels of Great Cobar shares, totalling 110,000 shares. 'Mr Nassif' never paid for the shares and, during several months while awaiting payment, the price of Great Cobar shares fell. Woolner and Co. went broke as a result of the uncompleted transaction. Some suspected that the whole exercise had been a 'ramping' attempt to raise the price of Great Cobar shares, which had gone awry when the price actually fell instead of rising. In a separate matter, George Earle Baker—another of the promoters of Great Cobar Limited, who would later become bankrupt—obtained a judgement, against Woolner & Co., for £11,702. Woolner and his partner Sumner-Jones were declared in default and ‘hammered’, meaning they could no longer trade on the London Stock Exchange. Bankrupt and publicly humiliated, Woolner attempted to re-establish his career in America, spending some of his time there. His personal bankruptcy was discharged in 1910.

Hugh Woolner survived the sinking of Titanic, in 1912, when he and his Swedish friend, Mauritz Håkan Björnström-Steffansson, leapt aboard collapsible lifeboat 'D', as it was being lowered into the water. The two pulled another man, Frederick Maxfield Hoyt, from the water to safety.The boat was otherwise mainly filled by women and children. Woolner subsequently gave evidence at the United States Senate inquiry into the loss of Titanic.

Later, Woolner was accused of exerting undue influence on the 1912 and 1913 wills of Elizabeth Josephine Forster. She was a wealthy nonagenarian and patron of artists, whose property was worth more than £500,000. Forster's relatives took the matter to the Admiralty, Divorce and Probate Division of the High Court in London. They alleged that the will was not duly executed, that Elizabeth Foster was not of sound mind, and that she had not understood the will. They argued that her property had to be protected by the Commissioners in Lunacy. The case was settled, in March 1917.

Location and scale of operations

In the late 19th Century and first decade of the 20th Century, most non-ferrous metal mines in Australia had local smelters. In New South Wales alone, there were examples of mine site smelters at Burraga, Cadia, Sunny Corner, Cangai, Currawang, Bobadah, Nymagee, Mount Hope, Girilambone, Illewong, Elouera, and Shuttleton. However, some of the larger miners stopped smelting at their mines and established smelting works on or near the coast. Examples were the Broken Hill smelters at Port Pirie, the Electrolytic Smelting and Refining operation at Port Kembla—successor to an earlier operation at Dapto— and the Cockle Creek Smelter.

At least one observer, later saw the decision to smelt at the Great Cobar mine site as a fatal mistake. The trend to off-mine smelting was made more feasible by the use of the froth flotation process, at the mine site, so that only the concentrate was shipped from the mine site to the smelter, and coke did not need to be shipped to the mine. However, in 1906, Delprat's process of froth flotation was still newly-invented, and Great Cobar had no operational experience with it. Great Cobar Mining Syndicate had smelted at the mine profitably, but Great Cobar Limited would attempt to operate their mine and new smelter, on a far greater scale than the previous owners. Essentially, the mine and smelter capacity would be doubled.

Great Cobar Limited also inherited the electrolytic refinery at Lithgow, which would refine blister copper from the Cobar smelter, until 1911.

Expansion and mechanisation

Having to pay interest on the debentures, at very least, the new company needed to both increase production and constrain costs; the path to profitability lay through a large expansion in capacity and intensive mechanisation. The mine and smelter capacity would need to be doubled. However, achieving that target necessitated a massive capital expenditure. Great Cobar was to become a vast industrial undertaking, in a remote location.

The general manager of the mine, under Syndicate ownership, George Blakemore, already had ideas about how the mine and smelter should be developed. The company sent out from England its consulting engineer, John Kendall, and he too had ideas on the future expansion. Kendall was already familiar with the Great Cobar, having provided a report on its operations, for its former owners, in 1903, and the favourable report for the prospectus when Great Cobar Limited was floated.

Kendall confirmed the board's confidence in Blakemore, and he remained the general manager under the new ownership, but Kendall would be responsible for the design of the new plant. With shareholders impatient to receive a return, the two would work together, to speedily erect and commission a massive new plant, expected to cost £160,000.

When designing their new plant at Cobar, Kendall and Blakemore based it upon daily smelting rates of 1,500 tons of 3% copper ore—a target difficult for the mining operation to achieve—consuming 130 tons of coke. 900 tons of slag would also be produced, and need to dumped on the site. Later, due to the shortfall of 'basic' ore as a flux, up to 100 tons of limestone would also be needed daily.

Great Cobar, smelter (left) and main mine shaft (right), June 1912.

The new plant centred around a new main mine shaft, which Blakemore had already began to have sunk in 1903. The existing Barton's shaft could only raise 600 tons per day, and Becker's shaft somewhat less. The new shaft would raise all the mined ore, to meet the new target of 1.500 tons per day. The new main shaft was slightly to the north of the previously northernmost shaft of the old mine, Becker's shaft.

The main shaft had a rectangular cross-section, 15 feet by 8 feet, divided into three compartments; two carried cages and the other contained pipes, cables and a ladderway. There were levels spaced every 100 feet, from which the mine was worked. In June 1912, the mine was working down to the 13th level and the main shaft was at 1,419 feet down. By the time, the mine first closed in 1914, the main shaft was 1500 feet deep, providing access to 14 levels in the mine.

The winding engine for the main shaft was steam-powered, and made by Andrew Barclay and Sons. It was speed controlled by a high-speed governor, connected to the engine shaft by a chain-drive. There were two winder drums four feet wide and ten feet in diameter, onto which two layers of the steel rope were wound. The drum being operated was connected to the engine shaft via a steam-operated clutch. Braking was applied by a heavy weight acting on a brake drum, released by a foot control. The brake was applied automatically, if the steam supply or the winding engine driver was lost. The levers and controls were arranged so that these could be operated by one winding engine driver, without moving from his usual position.

Furnaces and 40 ton overhead crane (1912)

In 1907-1908, a huge new steel framed building and a new steel headframe, for the new main shaft, were erected. Then there was the rest of the new equipment; two gyratory crushers, three water jacket furnaces and three Bessemer convertors, together with two electric locomotives, slag pot wagons, two electric overhead gantry cranes (one 20 ton and one 40 ton), steel plate conveyors, and a massive new powerhouse to supply the site with electricity, compressed air and air last for the furnaces. There was a new system of standard gauge railways in the plant, with overhead wiring for the electric locomotives.

Visible for miles around Cobar, the smelter chimney was the highest on the site, at 206 feet high. It was 25 feet in diameter at its base and 7 feet at its top. It contained 250,000 bricks, surrounded by 200 tons of steel plates, secured with a million rivets.

Teething problems, changes, extensions, and new capital

When the new plant was completed around September 1908, there were problems bringing it into service, but fortunately the old syndicate-era smelters were able to be kept working. By January 1909, two of the new furnaces were working but had been damaged; the other one was completely out of service. Kendall blamed Blakemore for this situation. Blakemore was dismissed, and replaced with a North American manager, Herman Bellinger, in February 1909. Blakemore contended that Kendall's design had been faulty, and he remained in the district as a consultant to other ventures. Blakemore would later work for the rival C.S.A. mine, something which would have consequences for the Great Cobar, a decade into the future.

The Managing Director, John Kendall, like Blakemore, appears to have been held responsible for the new plant, and ceased to be connected with Great Cobar, after June 1909.

By August 1909, one newspaper report subtitled, "Parlous Position of Mine and Finances", reported that after paying the debenture holders, the company had made a net loss of £500. It pointed out that this was in fact an artificially low amount, because in company's accounts, "No provision has been made out of profits, for depreciation, preliminary expenses, underwriting commission, and discount on debentures", and by making a loss there was no contribution to a sinking fund—intended to be £100,000 per annum drawn from profits—for the eventual redemption of the crippling debentures.

Cobar Gold Mine and its viaduct (1911)

The company needed to raise more capital, and in November 1910, its authorised capital was increased to £1,000,000 by the issue of 30,000 new £5 shares. However, the directors also enacted a right to apply any new capital to the sinking fund for the redemption of debentures, which should have been funded from profits.

In 1910, the Company bought the Cobar Gold Mine, at nearby Dapville. Like the Chesney mine, it lay adjacent to the Peak branch line, allowing its ore to be railed to the Great Cobar smelters.

Bellinger came to see that indeed there were many faults in the design of the vast but rushed expansion. When there was industrial trouble in late 1909, Bellinger was in no hurry to resolve the strike, and used the consequent shutdowns for a major reworking of the still new plant. The plant was augmented with new bins, a fourth water jacket furnace and convertor, a 40 ton gantry crane, a second motor-generator set, another electric locomotive and more slag pot wagons, and the three damaged water jacket furnaces were rebuilt. In December 1912, a new flotation process plant entered service, which was intended to recover copper ore from the tailings of the original concentrator plant.

Administrative building.

The Great Cobar's electrolytic refinery at Lithgow operated until 1911. It was essentially unaltered from the days of the Great Cobar Mining Syndicate, who had built it. As Great Cobar's production grew, it became too much for the Lithgow plant to process, and Great Cobar exported their crude copper to be refined in America.

By the end of 1912, the surface plant finally was at least working properly.

Also in 1912, as if to demonstrate its confidence in the future for the mine, the company opened its grand new administration building. However, the new plant had cost as much as £500,000, which was way in excess of the original budget.

• Smelting at Great Cobar, c.1912
• 
  Water jacket furnaces and slag wagons (1912)
• 
  Pouring molten copper matte from a water jacket furnace, June 1912.
• 
  Convertor discharging blister copper into ingot moulds, 1911.
• 
  Tipping molten slag (1911)

Ancilliary plant

Water supply and mine pumps

Water tower and tanks (1911).

Large amounts of water were necessary, including as boiler feedwater, for cooling the water-jacket furnaces, and for the froth flotation plant. The plant had a large water strorage, a 'tank' or excavated dam. It also had a water tower and three water tanks on an elevated platform, which supplied the smelter.

In 1908, plans were in place to enhance the water supply by excavating 40,000 cubic yards to provide additional 'tank' capacity. By 1909, the mine tank had a capacity of at least 70-million gallons, however, in the semi-arid climate it was rarely completely full.

Electric pumps moved around 40,000 gallons of saline groundwater, per day, from the mine into saline lakes, where the water was lost to evaporation. In times of drought, in desperation, this saline water was sometimes used for cooling the water jacket furnaces, despite the resulting corrosion.

Boilers and chutes from overhead coal hoppers (1912)

Steam plant

Superheated steam for the plant was raised by six Babcock and Wilcox boilers, each rated at 450 horsepower (337.5 kW). The steam pressure was 170 pounds per square inch. The boilers used chain-grate mechanical stokers, with coal fed via chutes from overhead hoppers.

Steam was consumed in the powerhouse and by the mine winder engine. The powerhouse housed alternators, air compressors, and the air blowers for the water-jacket furnaces and convertors; all were steam powered.

Dependent upon having coke and coal available at all times, the mine site needed a buffer stock, in case of an interruption to shipments coming by rail. It had separate coal and coke dumps, each with their own siding where government wagons bringing the coal, mainly from Lithgow, were unloaded. Coal for the boilers was dumped into a bunker lying underneath the coal siding, from where a bucket conveyor carried it to overhead hoppers at the boilers.

Electrical power

An alternator and its directly-coupled steam engine (1911)

Electricity was generated using three 300 kW Siemens alternators, each powered by a directly-coupled Browett-Lindley vertical triple-expansion steam engine.

Alternating current power was consumed by lighting, the mine groundwater pumps, water supply pumps, conveyor belts, and motor-generator sets.

Two Siemens 260 kW motor-generator set provided 250 V direct current electricity. The d.c. power was consumed by the overhead cranes at the smelter, the convertor tilt mechanism drives, and the electric locomotives of the railway.

Interior of the powerhouse (1912)

Compressors and blowers

There were two cross compound steam-powered air compressors, made by Walker Brothers, each of which had capacity to supply 25 rock drills.

The blowing engine for converters was a cross compound steam engine.

The Roots Connorsville positive-displacement blowers, for the water-jacket furnaces, each had a displacement of 300 cubic feet of air per revolution. Each blower was directly coupled to a tandem compound steam engine, of 540 indicated horsepower, running at 110 rpm, and so providing an air blast of up to 33,000 cubic feet per minute. The blower engines were made by Walker Brothers, of Wigan

Conveyors and bins

Ore from the mine was crushed using two 'Heclon' gyratory crushers, made by the Hadfield Steel Company. The crushed ore passed to a steel plate conveyor, where gangue material was manually removed by workers known as 'pickers', and then to the crusher bins. From the crusher bins, the ore was moved by rail to the ore conveyor for the bedding bins.

A contemporary photograph shows that the ore conveyor was an advanced design for its day, similar in concept to contemporary conveyor belts. It is not known what belting material was used. It conveyed the ore from where it was dumped from railway wagons to one of six bedding bins, with 6,000 tons capacity. These bins were built as part of the 1909-1911 modifications, and allowed ore mined from different stopes to be kept separate and so able to be sent to the smelter in the appropriate proportions.

Coal for the boilers was dumped into a bunker lying underneath the coal siding, from where a bucket conveyor carried it to overhead hoppers at the boilers.

• Conveyors
• 
  Ore conveyor to bedding bins (1912). Both were added as enhancements to the 1906 design.
• 
  Interior view of ore conveyor (1912)

Surface rail transport

Loading copper ingots into an NSWGR wagon. Note overhead wiring for electrified railway (1912)

The Copper Mine Branch line allowed government railways to bring coke and coal to the plant and to carry away the blister copper that the plant produced. It was connected to a standard gauge rail system inside the plant.

The standard gauge railway inside the plant was electrified at 250 Volts d.c. using overhead wiring. Locomotives, called 'motors', used either a type of semi-rigid bow collector (as can be seen in photographs of the time) or a pantograph, to obtain power from the overhead line. There were about 3.5 miles of electrified railways in the plant. The electrified railway had two major functions; moving ore from the crusher bins to the bedding bins for the furnaces and moving molten slag and concentrator tailings to the slag dump, but it also moved government wagons inside the mining lease boundaries.

From the bedding bins to the furnace itself, side-tip wagons were hauled by rope over an inclined tramway.

A vestige of the narrow gauge tramway that had been used under the Syndicate remained in use. It was used to convey wagons containing molten low-grade copper matte, drawn by horses, to an outside area, known as 'the matte ring', where it was cast in moulds. It was then fed back, in solid form, into the water jacket furnaces.

• Electrified railway and tramways
• 
  Electric locomotive hauling ore wagons (c.1913)
• 
  Dumping tailings at slag dump (1912)
• 
  Rope-hauled tramway to furnaces (1912)
• 
  Feeding floor at furnaces (1912)

Operational difficulties

In 1912, net profit for the year was £168,617—buoyed by a rise in the copper price from £58 per ton in December 1911 to £79 12s in June 1912—but this profit was not high enough to allow a dividend. Conscious that even this level of profitability was precarious—dependent as it was upon the copper price—above all, the company pushed for higher rates of production, neglecting mine development for short-term high rates of ore extraction.

Although the surface plant was heavily mechanised, the underground mine was not. Rock drills were powered by compressed air, and blasting was used, but otherwise underground mining was an entirely manual process, carried out by a large and expensive workforce. Mine skips (or 'trucks') of approximately one ton capacity were manually pushed into or hauled out of cages that were raised and lowered by the main shaft winder. At the lower levels, this task was done by 'platmen', while at the surface the corresponding task was done by 'bracemen'. A cage accommodated two skips at a time, and typically between 1,150 and 1,500 skips of ore were raised per 24-hour period, and a similar number of empty skips were returned.

The mine itself became a bottleneck in the vast enterprise, unable to get enough ore to the surface to satisfy the smelting furnaces. In 1910-11, miners raised a total of 298,050 tons of ore, while another 6,243 tons came from the old dump at the Cobar Gold Mine; from this ore the company recovered 6,248 tons of copper, 22,048 oz of gold, and 109,421 oz of silver, with a total value of £372,046. But that was not enough.

In the year to 30 June 1912, the smelter handled a massive 418,318 tons of ore, for an output of 6,736.5 tons of copper, 37,696 ounces of gold, and 178,938 ounces of silver, generating a gross profit of £168,691 5s 9d. But after deducting debenture interest, new construction costs and other expenses, it was still insufficient to pay a dividend.

A problem was that too much of the copper was being lost during smelting; the recovery rate was 1.94% copper per ton of ore, meaning around a quarter of the copper in the ore (assaying 2.6%) was lost during processing, mainly ending up in the slag. Bellinger added a concentration and flotation plant, capable of processing 700 tons per day, aiming to improve recovery. Moreover, the average ore grade was falling, from 2.8% copper in 1910-11, to 2.6% in 1911-12. The company needed to mine more ore just to maintain the same level of copper production. Mining at an increasing depth also added to the cost of ore extraction.

Ventilation of the workings was also becoming a problem, due to the lack of mine development work; in 1913, the Inspector of Mines issued a compulsory order that the Great Cobar excavate a drive connecting its workings to the neighbouring North Cobar workings, to improve ventilation in the mine. Ground water was also a problem, 40,000 gallons per day of corrosive saline water needed to be pumped out of the workings, using three electric pumps.

Mullock was needed for backfilling, to raise the floor level of underground stopes, as miners extracted the ore, and to stabilize worked-out areas. There was a separate mullock shaft, down which mullock was dropped to the 300 foot level, from where it was distributed, as fill to raise the floor level of stopes as these were mined out. Coal ash from the steam boilers as used to supplement the mullock. In 1911, work began on an open-cut quarry, intended only as a source of mullock, not mineral ore. At first sight, this may seem a strange and wasteful practice, but in those times, with the ore being smelted in furnaces, much of the gangue material ended up in the form of slag, not mullock or tailings. Solidified slag was not suitable for mullocking.

Even with the quarry, the mullocking of the underground workings was not sufficient to prevent a large ground movement or "creep", in 1913, extending from the mine's No.9 level to the surface, which resulted in the destruction of the workings above No. 9 level, and the inability to access some ore reserves.

Some other Australian mine site smelters, notably Mt Lyell and Wallaroo, had granulated the molten slag by pouring it into water, producing a product which could replace mullock in filling operations, Probably due to the copious amount of water needed for slag granulation, the Great Cobar just tipped its slag. It appears that no attempt was made to use the saline groundwater from the mine for this purpose.

The plant had been designed on the basis of needing to dispose of 900 tons of slag per day, but at its final capacity and with lower ore grades, the capacity needed rose to 1,450 tons of slag per day. Two types of slag ladle wagons were used, with capacities of 10 and 25 tons; a larger type with 35 ton capacity was not a success. Hauling just one slag wagon at a time, hundreds of short trips to the slag dump were necessary, each day, to maintain production. The heat and sulphurous fumes generated, when tipping the molten slag, made working conditions difficult during this operation. At night, the glow in the sky resulting from slag being tipped was visible, at Canbelego nearly 50 km to the east.

An even more pressing problem for the company was the type of ore that was being mined; 'basic' and 'silicaceous' (or 'acidic') copper ores occurred at Cobar. Both types needed to be blended with the other for smelting, or other fluxes were needed to effectively remove impurities, particularly iron, from the copper matte produced in the water jacket furnaces. As time progressed, and mining went deeper, the ore from the Great Cobar was increasingly 'silicaceous', with a higher iron content. The higher rates of ore production at Great also meant that the amount of 'basic' ore from the Chesney Mine was not adequate to provide sufficient smelting flux. Instead, the Great Cobar smelters needed to bring in more limestone as a flux. In early 1914, the company was planning to open a quarry, at Molong, capable of mining the 100 tons of limestone per day, needed by its smelters.

A possible solution was to stop smelting at Great Cobar. One of the smaller mines in the region, the Queen Bee Mine, at Illewong, eventually stopped its mine site smelting operations altogether, and instead produced copper concentrate, which was shipped to the large E.R.& S copper smelter and electrolytic refinery, at Port Kembla, which had opened in 1908. However, the Great Cobar company had invested in a huge smelter at its remote mine site, and writing off such a large investment was always a very unlikely outcome. A flotation plant of a size needed to treat all of Cobar's ore would be immense. Moreover, by late 1913, it was apparent that the Great Cobar's own flotation plant, of 50,000 tons per annum capacity was not performing to expectations.

The electrolytic refinery at Lithgow initially remained in operation under Great Cobar Limited, but was closed down in August 1911, retaining only the coal mine and coke works. From then on, Great Cobar sent the blister copper that it smelted at Cobar to America for refining.

Workforce and industrial relations

Afternoon shift (1911)

The economics of the new venture dictated that the mine and would be worked on three shifts, seven days per week. Reducing the number of shifts could never be an option at Great Cobar, because the mine, at best, could barely provide enough low-grade ore to feed the large smelter. That necessitated a large workforce and continuity of operations.

Workforce relations did not get off to a good start, while Kendall was in Cobar and Lithgow, in September 1906. In public statements, he showed an uncompromising attitude to the unionised workforce.

By 1912, the Company employed a total of 2,200 people, with 960 working in the mine and smelter, and its wages and salary bill was £23,000 per fortnight.

Winding engine driver at controls (1911)

There were three major trade unions representing various workers. The Amalgamated Miners' Association represented the underground workers, the Smelters Union representing the smelter workers, and the Engine Drivers and Fireman's Association mainly representing the remaining surface workers associated with the powerhouse, boilers, steam engines and industrial railway. On occasion, the unions acted jointly, as the Combined Unions.

A constant source of dispute were wage rates. Different classes of employees were in different ways. Some were paid a wage per shift, whereas others, for example. those filling mine skips (or 'trucks') were paid by the 'truck' (around one ton of ore), and others such as smelter operators had pay rates that used a sliding scale, based on the copper price.

According to Blakemore, in 1907, Cobar workers were well-paid, having a higher rate of pay than elsehere in New South Wales. All workers were on a six-day working week of eight-hour shifts, in 1907. Mining labor average wages were 11 shillings a day, but many were earning up to 22s a day, and men working in the new main shaft averaged 30s a day. Furnace labourers got from 8s to 9s a day, and ordinary labourers 8s a day. Blakemore had wanted to cover the seventh day by a new gang of workers, but unions were able instead to obtain additional overtime shifts at a rate of time-and-a-quarter, in a ruling by the Arbitration Court, and by threatening the Company with strike action.

Cobar was a remote town, with a large concentration of mine workers. Bellinger stated that it was difficult to retain workers there, when jobs were on offer in more "more fortunately situated" localities or on government construction projects. He mentioned specifically, construction of Burrinjuck Dam and the Sydney sewerage scheme. Bellinger stated that the mine workforce was short of 80 machine miners, in late 1911, and blamed the inability to meet production targets on that labour shortage.

During his time as manager, Bellinger attempted to resolve some of the long-standing issues with the workers, and was seen as conciliatory, and open to negotiation. Unions complained that when wages were increased, prices in Cobar also rose accordingly. In 1912, to reduce the cost-of-living of employees, rather than grant higher wages, a company-owned bakery and butcher shop were opened, selling only to company employees at controlled prices.

Another source of dissent between the company and its unionised workforce was the ever-present risk of work-related death or injury, and the unions practice of stopping all underground work, for three shifts, when a miner died from a work-related event. There were many such events over the years that the mine operated.

Accidents and fatalities (1908-1914)

Hard-rock mining was a dangerous occupation; the accident rate for Cobar district miners, in 1912, was 109.3 accidents per 1,000 workers. Additionally, the surface works and smelters at the Great Cobar mine had many hazards, ranging from height to molten metal and slag. Serious accidents were commonly fatal.

In January 1908, while sinking the new main shaft, John Pascoe was hit in the head by a full bucket that had fallen around 125 feet, dying soon afterwards. In June 1908, James Cassidy, a platman (a person who puts skips into and out of the winder cage, at an underground level), was killed by an unknown object that fell down the shaft. William Jackson was killed in a rockfall in November 1908. In late October 1909, a labourer, Ambrose Fox, died of burns to his head and body caused by an explosion of hot metal at a water-jacket furnace.

1910 was a particularly bad year; six died. In January 1910 James Craddock died from internal injuries, after falling from an 18 foot high scaffold. In May 1910, William Evans died from internal injuries he received while pulling down a structure. In September 1910, Edward Atkins died after falling, unseen by other miners, into an ore pass (a vertical or near-vertical opening made to provide more convenient material handling by gravity and to reduce haulage distances). In October 1910, two men died; a surface worker, Gerdhardt Weichmann, was killed, apparently, in an unexplained fall from a platform, and a miner, Walter Bender, died from injuries after a rockfall. In November 1910, Thomas Wells, stepped out of the wrong side of a cage, at the 9th level, into an open shaft compartment, falling to his death; the cage was required to have a bar preventing access to the other compartment of the shaft, but it was not in place.

It had been the practice of the underground miners to stop work, for three shifts, following a fatality. The sad events of 1910, caused significant disruption to the operation of the smelters. In November 1910, Henry Bellinger on behalf of the company made an offer to the workers to induce them to continue working in future, except for two hours to attend the funeral. In return, if a levy of half a crown (or 2 shillings and 6 pence) would be contributed to the widow, from each miner's wage, the company would also contribute pound-for-pound. It was expected that an amount of around £275 could be given for the welfare of the widow and family of the dead miner. The union countered by offering to donate half a shift's pay, if the company contributed pound-for-pound. It was to take until March 1913 for the company and the Combined Unions to conclude an agreement. All mine workers contributed 2 shillings and the company one shilling, to a jointly administered Miners' Accident Relief Fund, mining work was to continue, but workers had two hours off, at their own expense, to attend the funeral.

1911 was another bad year, with five fatalities. In February 1911, Charles Stokes died in hospital after he was severely burned in an explosion of hot metal. Also in February 1911, John Jolly died of peritonitis after being crushed against a wall by a crane. Frank Welsh died, in April 1911, succumbing to the injuries he received when a rock knocked him into an ore pass and he was buried, except for his head and hands. In August 1911, a miner, Oliver Rafferty, was working on a boring machine, when he overbalanced and fell backwards onto a pile of rocks, hitting his head, and then rolling 25 feet down an ore pass; he died on the way to the hospital. In December 1911, Thomas Attwater, a shunter, fell between the electric locomotive that he was climbing into and a slag pot, after a handrail broke, and then was run over; he died at the hospital.

The fatalities continued. In December 1912, Henry Love died, after a blast in an ore pass in which he was working. In April 1913, Walter McEvoy died after seven hours in hospital, after a blasting accident had ripped open his abdomen. In June 1913, a Romanian miner, Giames Piter, was killed in a fall of earth. In July 1913, a pump driver, Arthur Sara, attempting to cross a railway line, caught his foot and was run over and killed by an electric locomotive. In November 1913, Simon Burrs was boodling (moving material by shovel) when the heap, upon which he was standing, collapsed; he fell headfirst, and was completely buried, dying of asphyxia while he was being freed. In December 1913, Walter Wardle, a shift boss at the furnaces, fell backwards off a ladder and died. In January 1914, an assistant manager, Albert Luff, was killed by a rockfall, while he was inspecting a stope.

Accidents, if not fatal, could result in a life-changing disability. Maurice O'Donnell lost his right hand and a part of his arm, when a blasting charge detonated prematurely, in February 1911. In November 1911, Thomas Jobson, an engine driver in the surface workings, caught his left hand in a conveyor belt, and his arm needed to be amputated at the elbow. A Russian employee, John Atnor, was trying to remove a broken wooden handle from a hammer head, in November 1913, using dynamite. His shattered forearm was amputated below the elbow.

Explosives magazine in 1901.

There were also some remarkable survivals, and near misses.

Site of the magazine, after the explosion (Feb. 1908)

While the new plant was under construction, on 25 January 1908, a spectacular explosion destroyed the mine's 30-year old explosives magazine, which stood well away from the mine itself. The total weight of blasting explosives held in the magazine at the time was 2,285 lbs, slightly over a ton. It was first noticed that the magazine was on fire, then a small explosion occurred, lifting off the roof, followed 15 minutes later by an enormous explosion. Fortunately, there had been time for police to warn most residents of the adjacent villages of Dapville and Wrightville of the impending danger, and to prevent anyone using the road between Cobar and Wrightville. There were no serious injuries and, other than the total destruction of the magazine itself, very little property damage.

In January 1910, a shift boss at the Great Cobar concentrators named Delaney, had left his work to rescue a goat from a dog, when he fell into an unprotected mine shaft. He fell around 110 feet, but when rescued was found to be not seriously injured by the fall. Later that year, in March, a cage, fully laden with ore, fell down the shaft, after a link broke, but there were no injuries.

Elusive profits and financial difficulties

In 1907, the company paid shareholders a 15% dividend totalling £112,000; by the next year, the directors regretted that they had not retained it, as the costs of the new plant began to be incurred. Reportedly, within three months of paying the dividend, the company's balance sheet was in the red, by £24,000. It would be the company's first and last dividend to its shareholders.

The Company had expended as much as £500,000 on the new plant at Cobar, by mid 1912, which was way in excess of the original budget of £160,000. The supply-only cost of the imported equipment was £71,225, to which was added much-resented import duties of £26,000. From these costs alone, it was apparent that the original budget was woefully inadequate, barely £62,000, was left for transport to site, foundations, equipment installation, local equipment purchases, buildings, chimneys, and sinking the new shaft.

There were additional costs for items not in the original scope, introduced by Bellinger's plant modifications of 1909-1911; expansion of smelter capacity by one third (fourth furnace and converter) and the corresponding proportionate increases in scope for the overhead cranes, powerhouse, water system, and industrial railway; then there were two new reverberatory furnaces needed to make copper anodes (replacing Lithgow anode furnaces, after that plant closed in 1911), ore bins and conveyors, the flotation plant, workshops and a foundry, and development of the new mullock pit and water reservoir.

The cost blew out, before even considering the financial impact of writing off the value of the hitherto profitable plant from the days of the Syndicate, namely three water-jacket furnaces at Cobar and the refining plant at Lithgow. The cost blow out also had the effect of severely constraining the already limited working capital, for such a large enterprise.

At 30 June 1912, the estimated ore reserves of the Great Cobar mine were 1,813,087 tons, assaying 2.6% copper. To that could be added 302,174 tons at the Cobar Gold Mine and 663,349 tons from the Chesney Mine, totalling 2,777,610 tons, with another 350,000 that were viable to mine at Great Cobar at a suitably high copper price. At the smelting rate of 1912, 418,318 tons of ore, its ore reserves would be exhausted in around seven years, foreseeably as soon as 1919. Even had the mine been profitable, its economic life would be short, limiting the return on the capital investment.

The inability to pay dividends affected the company's ability to raise new share capital. In 1910, the company had put 30,000 new £5 shares up for sale, with the capital raised to be used to redeem debentures, and reduce the crippling interest payments. By the end of 1911, only 15,000 of these new shares had been issued to shareholders. With existing Great Cobar shares trading below their £5 face value, there was no reason for the remaining 15,000 shares to be taken up.

In 1912, net profit for the year was £168,617—buoyed by a rise in the copper price from £58 per ton in December 1911 to £79 12s in June 1912—but this profit was not high enough to allow a dividend. The result underlined that much of the improved financial performance was due to a high copper price and that profitability was precarious. By early July 1912, with the copper price in London at £76 15s, Great Cobar shares were still trading below face value, at £4 3s 7½d.

Wages and salaries for the large workforce were an unavoidable cost; in 1912, amounting to £23,000 per fortnight, or nearly £600,000 per annum. The profitability of the Great Cobar's operations was sensitive to increased wage rates and to the productivity of its workforce.

In 1913, the venture made a gross profit of £116,281, but this was netted off against debenture interest payments, redemption of debentures, and expenditure on the new flotation plant, leaving a net loss of £23,210.

A decrease in the price of copper to a range of £65 to £70 during 1913 led to further financial difficulties and a drop in share price to 17s 6d, in mid December 1913, and to only 6s 3d by January 1914. Bellinger resigned on 10 November 1913, following a visit to Cobar, by one of the company's English directors, Mr W. Pellew-Harvey, who was also an internationally-experienced mining engineer. Bellinger took up a position in Chile. Upon his return to London, Pellew-Harvey gave a report highly critical of Bellinger's management of Great Cobar.

The company held its annual general meeting in London, on 17 December 1913. The meeting took a decision to place the management of the Great Cobar operations in the hands of Bewick, Moreing, and Co., a firm of consulting mining engineers and mine managers. It recognised that there had been a woefully inadequate allowance for depreciation—insufficient even to cover the write-off of the old Syndicate plant— but did not call a halt to the loss-making operations, which were burdened by the crippling interest payments to debenture holders.

On 30 December 1913, an informal meeting of shareholders, highly critical of the board's actions, was held. A report of the meeting stated, "In regard to finance, the directors had not shown themselves any more expert than they had in dealing with the machinery. The initial mistake was over capitalisation The purchase consideration amounted to over £1,000,000 talking in round figures and the preliminary expenses to £160,000 leaving only about £114,746 working capital which was far too small and the company had been suffering in consequence, Why was so high a price paid for this property? The prospectus showed that the vendor bought it for £800,000 and sold it to the company for £1,006,000 and for finding subscriptions for shares and debentures to a total of £1,000 000 he received a commission of £140,000 of which £50,000 was paid in cash. Thus £350,000 of water was introduced into the capital. For this there were no assets on the other side of the accounts." Two of the dissident shareholders stood for election to the board of directors, but were defeated, by incumbent directors, in a ballot .

In January 1914, George Blakemore, by then the managing director of the rival C.S.A Mine, stated in a letter to a newspaper that the Great Cobar was in financial strife. He saw the huge plant at Cobar as "largely a lamentable waste of money"—by his calculation £470,000—and he opined that the production cost of copper from Great Cobar's operations was then more than double what it had been in 1905, under the Syndicate's management. He foresaw a company reconstruction, based on some kind of joint operation of the C.S.A. and Great Cobar Mines, as a solution to what he saw as the otherwise intractable problems of the Great Cobar's smelting operations, particularly the imbalance between 'basic' and 'silicaceous' ores. Supplying low-grade 'basic' ore from C.S.A. to the Great Cobar was one justification for a new branch railway to the C.S.A. mine, something Blakemore and C.S.A. Limited wanted. Potentially, joint operation may have allowed C.S.A. Limited to emerge as the dominant partner and perhaps acquire the vast Great Cobar assets at a discount.

The general manager of the Great Cobar, George Baker, rebutted Blakemore's claims. He instead pointed to a 25% increase in labour costs, poor relations between management and labour—implicitly blaming the previous general manager, Herman Bellinger, for that problem—and the lower efficiency of labour due to the greater depth of the mining operations. In the end, the precise reasons did not matter, the financial bottom line did.

An ominous sign was the price of the debentures, by the end of 1913, only £55 for £100 debenture face value. The Company had paid the 6% interest on the debentures, up to that time. The heavy discount apparently was due to fear of a future default. The informal meeting of shareholders, on 30 December 1913, had carried a resolution to vote for a change in management at the next annual general meeting, but the debenture holders would be the first to act.

Receivership and aftermath

On 7 April 1914, it was reported in London that the debenture holders had appointed a receiver, Arthur J Whims. Mr Klug, representing the firm of Bewick, Moreing, and Co., would be the new manager of the Great Cobar. There would be a complete, and indefinite, cessation of all operations, including even the company's bakery and butchers, throwing about 1,000 men out of work at Cobar.

Work did continued on essential work, such as filling mined out stopes with mullock, to stabilise the stopes. During this work, there was another fatality. In June 1914, Arthur Henwood's lifeless body emerged from a mullock pass, but how it came to be there was not known. An inquest determined that he died from suffocation.

At the beginning of August 1914, the filling work had largely been completed, when a cable arrived from London that resulted in 160 of the remaining workers being laid off. Initially, around 60 men were kept on to complete remaining work. The events, in Europe, leading to the outbreak of the First World War, paradoxically, had caused a fall in the price of copper. By the beginning of September 1914, only twenty men were employed, and the only activity was the operation of the mine pumps.

The mines pumps were kept running, until 6 September 1915, when pumping stopped for the first time in 24 years. The engine drivers agreed to work for nothing for another fortnight, to prevent the mine from filling. During that time, it was hoped to convince the NSW Government to provide a loan to assist the receiver reopening the mine. The Premier, William Holman, announced, in early November 1915, that the government would provide the loan, clearing the last obstacle for a recommencement of operations.

Operations during receivership (1915-1919)

Reopening

Following the outbreak of the First World War, vast quantities of copper were needed for brass bullet and shell cartridge casings. The price of copper rose in response to the demand, and the British Government sought to control supplies of the metal in its colonies and the Dominions. Reopening Great Cobar would not only have the potential for profitable operation by the receiver, but also had a patriotic dimension, supporting the war effort.

Mr W. Pellew-Harvey—in the role of a consultant this time—visited the mine, and identified that £102,000 was needed to restart operations. A meeting of the debenture holders, in May 1915, carried a resolution authorising the receiver to take the necessary steps to reopen the Great Cobar operations. The receiver attempted to raise the full amount, at 6% interest, from the debentures holders, but only £62,000 was raised. At the instigation of the local representative of the receiver, David Fell, the remaining £40,000 was allocated to the New South Wales Government, which agreed to similar terms as the participating debenture holders. At this lower level of capitalisation, it was estimated that the mine would provide a 23% return.

With the finance in place, the receivers of the company, in early November 1915, gave instructions to recommence operation, with the plan to be smelting ore again by the beginning of February 1916. The Great Cobar and Chesney mines had already been pumped out, then repairs to the Great Cobar's main shaft were made, and gradually operations restarted. The first blister copper was produced in early February 1916.

High copper prices assisted the reopened Great Cobar, but none of the operation's earlier difficulties had been resolved. The imbalance of 'basic' and 'silicaceous' ore, in particular, became ever more acute. The mining was by then occurring at the lower levels of the mine, increasing the difficulties of bringing it to the surface.

Accidents and workforce relations

Just after work at the mine had recommenced, in November 1915, there was a freak accident in which a miner, Fred Oding, was killed. He fell out of a cage which had unexpectedly jolted upward to around 10 feet above the surface. He then tumbled over a divider, into the open shaft compartment, grasped the divider briefly, and then fell to his death. In March 1916, a miner, Alftred Murray, died of severe injuries that he received in a rockfall, a fractured skull exposing part of his brain, a fractured thighbone, numerous lacerations, and shock. In September 1916, Joseph Buckley lost his footing and fell heavily. The large piece of heavy timber that he was carrying on his shoulder also fell, breaking his neck and killing him. In December 1916, George Green was killed in a rockfall. Tom Glasson died in February 1917, after falling down an ore pass. In March 1917, two men, Charles Naughton and Samuel McCaughey, were killed when six tons of rock from the roof of a stope fell on them. In April 1917, a miner, James Bond, suffered numerous fractures, in all four limbs, but no head or internal injuries, and remained conscious, after he fell down an ore pass, in what was described as a "Bond's extraordinary escape". In October 1918, Patrick Hannan was crushed to death in a rockfall. Late in the mine's life, in January 1919, there was a near miss, when an empty cage dropped 1,400 feet down the main shaft, smashing into the bottom.

In October 1918, smelter operations were briefly suspended due to low levels of ore in the bins, Mr E. Hogan Taylor, the manager of the mine, explained the suspension was due to four causes, all related to the workforce; abnormal absenteeism following pay day; absences due to influenza; underground workers had struck for two days following the fatal accident in which Patrick Hannan died; and a general shortage of workers over a period of many weeks.

Contention with C.S.A. Limited

In its heyday, the Great Cobar was the dominant copper mine of the Cobar field, but that status was no longer uncontested, by 1916. In 1910, the C.S.A. Mine—until then a modest silver-lead mine—identified a large copper resource. The chairman of its board was the ex-general manager of the Great Cobar, George Blakemore, and he aggressively pursued a policy to make the expanded C.S.A the dominant mine on the field.

An extension of the railway line from Cobar to the C.S.A. Mine, at Elouera to the north of Cobar, was under construction during 1917, and it opened in January 1918. One of the reasons that had been used to justify the railway extension was to ship low-grade 'basic' ore from the C.S.A. to the smelters of the Great Cobar Mine; it would be mixed with Great Cobar's 'silicaceous' ore, mainly as a flux for smelting, replacing limestone brought from much further away by rail. Such an arrangement held out a lifeline to the Great Cobar, but was never begun.

In 1917, the C.S.A. started using the first of its own water-jacket blast furnaces at its mine site. Some observers saw this as an illogical move—the huge Great Cobar smelters already existed and would soon have a rail connection to the C.S.A— and not the best outcome, considering the Cobar region as a whole. At latest by early 1919, there was an acrimonious disagreement, between the managements of the two companies, probably motivated by the underlying unresolved contention over which company would dominate copper production on the Cobar mining field. The outcomes were that Great Cobar did not take any of C.S.A.'s low-grade ore as flux, Great Cobar still needed to source limestone, and the new railway was under-utilised, although the railway branch line was still of great benefit, but to C.S.A. only.

Final closure (March 1919)

In the end, the final and existential threat to the Great Cobar came from the falling price of copper, after the end of the First World War in 1918. During the war, copper was £135 per ton, falling to £122 after the Armistice, and by March 1919 to £78, with the prospect of a further decline. At the prevailing copper prices, the Great Cobar's vast operations were no longer profitable. In March 1919, the Great Cobar mine and its smelters closed, throwing hundreds of men out of work in Cobar.

Over the life of Great Cobar Limited, the company had paid only one dividend of 15 shillings on its £5 shares, but had paid interest to the 6% debentures holders, up to the time of the appointment of the receiver in 1914. After 1914, the shareholders were no longer involved, having lost both all their money and control of the company. The debentures holders were also repaid the £62,000 that they had advanced in 1915. Also repaid, with 6% interest and a bonus, was the £40,000 loan from the NSW Government made in the same year.

Aftermath (1919 - 1965)

Possible resumption

For a short time, hopes were held that the mine would reopen. Any expectations of reopening of the Great Cobar furnaces were doomed. A report by the NSW Mines Department concluded that the mine was unprofitable, highlighting yet again the lack of basic ore. The C.S.A. Mine, once seen as key to solving the lack of 'basic ore', was itself facing difficulties due to low copper prices, and remained closed until September 1919; in the end, it could never supply the much-needed 'basic ore', or be operated jointly with the Great Cobar, because by mid 1920, it too was totally closed.

David Fell formulated a plan to start a limited operation to produce copper concentrate, by the flotation process, at another mine owned by Great Cobar Limited, the Cobar Gold Mine (Fort Bourke Mine). It would need £100,000 in new capital. The limited operation was envisaged as just the first step in a larger initiative to link the mines in the area by light railways, and operate the mines in the Cobar area as one joint operation, eventually perhaps resulting in mining resuming at the Great Cobar. Fell's plan did not win support of the debentures holders.

Sale of assets and demolition

In May 1919, the manager of the mine announced that the equipment in the mine, up to No. 10 level, had been removed, and that the pumps were being stopped, leaving about six months duration before water would reach that level of the mine. In June 1920, the receiver in London issued an order that the assets of the Great Cobar be realised. The Great Cobar was to remain closed, permanently.

In August 1921, the Great Cobar mine and smelter assets at Cobar were purchased by A.A. Goninan, a Newcastle-based engineering company, who only wanted to dismantle some large industrial buildings and relocate them to its site, at Broadmeadow, and sell off or scrap the rest. The electrolytic refinery at Lithgow had also closed, and parts of its equipment were sold and relocated to the C.S.A.'s new, but short-lived electrolytic refinery at Kandos. The Lithgow site was sold to its neighbour, Hoskins Iron and Steel, as was the Great Cobar's coal mine. Hoskins also purchased 12,000 tons of coke left at the Cobar site.

Demolition of the Great Cobar plant began quickly, with the largest of the chimneys being demolished in October 1921. The large building previously used for the furnaces and convertors and its overhead gantry cranes, were bought by English Electric. They reused the building and cranes in a new foundry at Clyde. The foundry had 1.5 miles of internal railway. The "ugly-looking but very powerful electric locomotive" used there, quite probably, was one from the Great Cobar.

Valuable machines that could be relocated easily were stripped from the plant. The overhead from the powerhouse ended up at the Hebburn No.2 Colliery, in the South Maitland Coalfields. Hebburn Collieries also bought the two motor-generator sets. The chassis of an electric locomotive from the Great Cobar was converted to a guard's van and used at the same colliery. The electricity generating equipment was relocated to Wagga Wagga, where it was reinstalled in the new power station that supplied the town from May 1922 until March 1928. By February 1924, the only substantial piece of machinery still at the site was the winding engine.

Abandoned mine site

What was left of the Great Cobar, c.1934. The tallest of its chimneys had been toppled in 1921.

A visitor to Cobar, in 1928, observed "a fine panoramic view of the Great Cobar Copper Mine, situated within a quarter mile distant. Extending to the right is a huge mountain of melted slag, resembling in appearance some prehistoric monster, lying there dormant forever. Turning slightly to the left you see the foundation and lower portion of Australia's mightiest chimney stack now demolished. Then you see the remains of the power-house, and lying amongst the ruins, and broken bricks, are the enormous flue pipes of the copper smelters, tangled and broken as though having collapsed in disgust."

In September 1933, a huge fire ripped through what remained of the Great Cobar. The fire was deliberately lit, with the ore bins and poppet head being set on fire. Burning debris fell down the main shaft, setting fire to underground timbers. The town was enveloped in dense, choking, sulphurous smoke, from burning timber and ore. It was expected that the fire would burn for a week—there being no means to suppress the fire—until there was nothing combustible left above the waterline.

Impact on Cobar

View of the Great Cobar from Cobar township (1915)

The final closure of the mine, by far Cobar's largest employer, was a huge blow to the town, but the situation rapidly became even worse.

Abandoned houses and goats in Cobar (c.1928)

The closure of the Great Cobar was just the first in the Cobar region, taking with it the Chesney Mine, at Wrightville, which it owned and which depended upon its smelter, and the Cobar Gold Mine. In 1920, the C.S.A mine at Elouera closed unexpectedly due to an underground fire, as did the Gladstone Mine, at Wrightville, which used that mine's smelter. In July 1921, the Occidental Gold Mine at Wrightville closed, and the widespread expectations that it would reopen were dashed in July 1922. After the Mount Boppy Gold Mine, at Canbelego, finally closed, in 1922, there were no longer any large mines working in the Cobar region, and there would not be until work resumed at the Occidental Mine, subsequently the New Occidental Mine, in 1933. Many miners and their families left the district altogether.

The effect of the mine closures on the town of Cobar was dramatic. It was reported, in 1924, that 700 houses had been demolished and removed, that another 700 houses had fallen down or were in ruins, and that many of its hotels were shuttered.

Later in the 1930s, two of the mines once owned by Great Cobar Limited, the Chesney Mine and the Cobar Gold Mine, were reopened, by the New Occidental company, and both worked until 1952. The rival C.S.A. mine was reopened in the 1960s, and continues in operation. The town of Cobar survived the interruptions in mining activity, but its population never returned to that of its heyday when the Great Cobar was working.

Remnants

The administration office building of the Great Cobar mine has become the Great Cobar Museum and Visitor Information Centre.

Cobar welcome sign (2017). The concrete structure is a relic of the Great Cobar mine.

Over a century after the closure of the mine, much of the remainder of the Great Cobar mine site is fenced off and off limits to the public, for reasons of safety. Behind and to the south of the museum is a large piece of land which was once the mine and smelter site, and still has some ruins and remnants. The open-cut mullock quarry is now a lake on the site. At the southern and eastern ends of the site, is the vast black-coloured slag dump. In the north-eastern corner of the site, the concrete structure supporting the huge 'Cobar' sign, at the entrance to the town, is a relic of the Great Cobar mine.

Some convertor vessels from the Great Cobar have been recovered and provided to the heritage centre.

Cobar Cemetery is the final resting place of many who died as a result of fatal accidents at the mine, and also of Sidwell Kruge (later Dean) who first identified the rock samples from Cobar as copper ore.

The ornately engraved share warrants of Great Cobar Limited, are still traded, sometimes at prices higher than their £5 per share face value, but only as collectables.

• 
  Great Cobar Museum & Cobar Visitors' Centre, the former administration offices.
• 
  Part of the vast slag dump, viewed from Kidman Way (Aug 2024)
• 
  Great Cobar Ltd share warrant. This one was issued after more capital was authorised, in late 1910 (note red-coloured overprinting).

Recent mining activity

Fence, gate, and signage (2024)

The Great Cobar Mine itself never reopened but, in 2022, planning permission was granted to once again mine within its boundaries.

A deposit of copper-silver-gold ore has been identified, at a depth of around 1000m, which is more than double the depth of the deepest of the old Great Cobar mine workings. The new resource is estimated to contain 47,000 tonnes of copper and 61,000 ounces of gold, with an estimated mining life of four to five years.

It will be accessed by declines, leaving the old Great Cobar mine site safely cordoned off and undisturbed.