Jump to content

Kröhnkite

From Wikipedia, the free encyclopedia
Kröhnkite
General
CategorySulfate mineral
Formula
(repeating unit)
Na2Cu(SO4)2•2H2O
IMA symbolKhk[1]
Strunz classification7.CC.30
Crystal systemMonoclinic
Crystal classPrismatic (2/m)
(same H-M symbol)
Space groupP21/c
Unit cella = 5.78 Å, b = 12.58 Å
c = 5.48 Å; β = 108.3°; Z = 2
Identification
ColorBlue, dark sky blue, greenish blue, yellowish green
Crystal habitEncrustations (on matrix), fibrous, massive
TwinningCommon, sometimes heart-shaped
CleavagePerfect {010}, good (011), very imperfect {101}
FractureConchoidal
Mohs scale hardness2.5 – 3.0
LusterVitreous
StreakWhite
DiaphaneityTransparent
Specific gravity2.92
Optical propertiesBiaxial (-)
Refractive indexnα = 1.544 nβ = 1.578 nγ = 1.601
Birefringence0.057
2V angle78° measured
SolubilityReadily soluble in water
References[2][3][4][5]

Kröhnkite ( Na2Cu(SO4)2•2H2O ) is a rare copper sulfate mineral named after B. Kröhnke who first researched it.[3] Kröhnkite may be replaced by Saranchinaite, the anhydrous form of the mineral, if heated to temperatures above 200 °C (392 °F).[3]

Crystallography

[edit]

Kröhnkite has monoclinic symmetry (2/m).[5] Monoclinic symmetry implies that the mineral contains three axes of differing length (typically labeled a, b, and c), two of which intersect each other at 90° and one that intersects at an acute angle.[6] Specifically, it belongs to the 2/m symmetry class meaning, the mineral has a 2-fold rotation axis about the b axis.[6] It also has a unique motif of sulfate tetrahedra chains and copper octahedra aligned along the c axis and linked together by sodium atoms.[5] Kröhnkite exhibits the optical property birefringence; the difference in the two refractive indices of a mineral.[3] Because this mineral is birefringent, it must be anisotropic. Anisotropic minerals cause the velocity of light to vary depending on the direction of travel through the mineral. Kröhnkite is biaxial negative, which reveals that the mineral has two optic axes.[3]

Importance

[edit]

Kröhnkite has the same general formula ( (X2M(TO4)2(H2O)2) ) as minerals which are found in environments affected by hydrothermal alteration, making it important in identifying where such alterations have occurred. Furthermore, the minerals sharing this composition are organized according to three crystal structure types, one being the unique kröhnkite structure which is often used to describe minerals exhibiting the same chain-like structure.[7]

Discovery and occurrence

[edit]

Kröhnkite was first researched after an occurrence in the Chuquicamata Mine, Chile, and has been reported from a number of locations in the Atacama region. Associated minerals in the discovery location include atacamite, blodite, chalcanthite, antlerite and natrochalcite. It occurs in the oxidized zone of copper deposits in arid environments.[4]

References

[edit]
  1. ^ Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine. 85 (3): 291–320. Bibcode:2021MinM...85..291W. doi:10.1180/mgm.2021.43. S2CID 235729616.
  2. ^ "Kröhnkite Mineral Data." http://webmineral.com/data/Krohnkite.shtml. Accessed 28 November 2010.
  3. ^ a b c d e Kröhnkite Mineral Data, Mindat.org, retrieved 8 October 2010
  4. ^ a b Anthony, John W.; Bideaux, Richard A.; Bladh, Kenneth W.; Nichols, Monte C. (2005). "Kröhnkite" (PDF). Handbook of Mineralogy. Mineral Data Publishing. Retrieved 22 May 2022.
  5. ^ a b c Hawthorne, F. C.; Ferguson, R. B. (15 June 1975). "Refinement of the crystal structure of kröhnkite". Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry. 31 (6): 1753–1755. doi:10.1107/S0567740875006048.
  6. ^ a b Schwarzenbach, Dieter (1996). Crystallography. New York: John Wiley. ISBN 978-0-471-95598-6.
  7. ^ Herwig, S.; Hawthorne, F. C. (1 October 2006). "The topology of hydrogen bonding in brandtite, collinsite and fairfieldite". The Canadian Mineralogist. 44 (5): 1181–1196. doi:10.2113/gscanmin.44.5.1181.