Jump to content

Road-holding

From Wikipedia, the free encyclopedia

Road-holding – also written as roadholding and road holding – (in French being called "tenue de route", in German "Beibehaltung der Spur"), is essentially determined by the ability of a vehicle to stay on the road and on a desired trajectory of motion, whatever the circumstances (in curves, on greasy, wet or low-grip ground, loaded or not, etc.) may be, but also by the degree of ease that a driver may sense in controlling it in an emergency situation.[1] (Hereby, the laws of nature as a framework, including the gravitational field of the planet Earth as well as the phenomenon of inertia, are tacitly assumed as given.)

In the above context, the straight-line stability of a vehicle – which is concomitant with its ability to stay on a desired trajectory of motion – necessitates a certain degree of understeering.[2]

The capability to smooth down the road imperfections, affects both the comfort and the road-holding of a vehicle. To improve comfort in this regard means, basically, to limit the vertical acceleration fluctuations of the vehicle body and hence of passengers. To improve road-holding means, among other things, to limit the fluctuations of the vertical force that each tire exchanges with the road. Therefore, modeling and simulation using realistic suspension-damping models, taking the vehicle tires into account, offer a straightforward opportunity for road-holding improvement of vehicles.[3] Optimization techniques for this purpose are also known.[4] The application of inerters is a very new possibility in this regard, although this technology is more destined to race cars than to ordinary vehicle applications.[5]

As a more sophisticated means for improving road-holding, active suspension – involving sensors, actuators and microcontrollers – may also serve.[6]

For vehicle speeds above approximately 40 meters per second, the effects of aerodynamic forces at an automobile (that is not designed in a too odd manner) tend to become sensible for its road-holding.[7]

Beyond what has been previously mentioned, electronic stability control, if being present on a vehicle and properly tuned, will have a stabilizing influence on the trajectory of motion and accordingly an improving effect on road-holding of that vehicle.

See also

[edit]

References

[edit]
  1. ^ Campbell, C.: Automobile suspensions. Chapman&Hall, London 1981, pp. 105 f.
  2. ^ Campbell, C.: Automobile suspensions. Chapman&Hall, London 1981, p. 106.
  3. ^ Guiggiani, M.: The science of vehicle dynamics: handling, braking, and ride of road and race cars. 2nd edition. Springer, Cham [2018], ISBN 978-3-319-73219-0, pp. 417-460.
  4. ^ Shirahatti, A., Prasad, P. S. S.: Optimal design of passenger car suspension for ride and road holding. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol. 30, Fasc. 1, pp. 66-76, 2008.
  5. ^ Guiggiani, M.: The science of vehicle dynamics: handling, braking, and ride of road and race cars. 2nd edition. Springer, Cham [2018], ISBN 978-3-319-73219-0, p. 426.
  6. ^ Bharali, J., Garg, N.: Efficient ride quality and road holding improvement for active suspension system. In: 14th IEEE India Council International Conference (INDICON), December 15–17, 2017, Roorkee, India. IEEE 2018, pp. 1179-1184.
  7. ^ Doniselli, C. et al.: Aerodynamic effects on ride comfort and road holding of automobiles. In: International Journal of Vehicle Mechanics and Mobility. Vol. 25, Issue Suppl. 1, pp. 99-125, 1996.