Jump to content

Terephthalaldehyde

From Wikipedia, the free encyclopedia
Terephthalaldehyde
Names
Other names
1,4-Benzenedialdehyde
1,4-Diformylbenzene
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.009.805 Edit this at Wikidata
EC Number
  • 210-784-8
UNII
  • InChI=1S/C8H6O2/c9-5-7-1-2-8(6-10)4-3-7/h1-6H
    Key: KUCOHFSKRZZVRO-UHFFFAOYSA-N
  • C1=CC(=CC=C1C=O)C=O
Properties
C8H6O2
Molar mass 134.132
Appearance white to beige
Density 1.06 g/mL
Melting point 114–117 °C (237–243 °F; 387–390 K)
Boiling point 245-248
Hazards
GHS labelling:[1]
GHS06: ToxicGHS07: Exclamation mark
Danger
H302, H311, H315, H319, H335
P261, P280, P304+P340, P305+P351+P338, P405, P501
Flash point 76 °C
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Terephthalaldehyde (TA) is an organic compound with the formula C6H4(CHO)2. It is one of three isomers of benzene dicarboxaldehyde, in which the aldehyde moieties are positioned in the para conformation on the benzene ring. Terephthalaldehyde appears as a white to beige solid, typically in the form of a powder. It is soluble in many organic solvents, such as alcohols (e.g., methanol or ethanol) and ethers (e.g., tetrahydrofuran or diethylether).

Preparation

[edit]

Terepthalaldehyde can be synthesised from p-xylene in two steps.[2] First, p-xylene can be reacted with bromine to create α,α,α',α'-Tetrabromo-p-xylene. Next, sulphuric acid is introduced to create terephthaldehyde. Alternative procedures also describe the conversion of similar p-xylene derivatives into terephthalaldehyde.

Reactions and applications

[edit]

Terphthalaldehyde is used in the preparation of imines, which are also commonly referred to as Schiff bases, following a condensation reaction with amines. During this reaction, water is also formed. This reaction is by definition reversible, thus creating an equilibrium between aldehyde and amine on one side, and the imine and water on the other. However, due to aromatic conjugation between the imine group and benzene ring, the imines are relatively stable and will not easily hydrolyse back to the aldehyde.[3] When in an acidic aqueous environment, however, imines will start to hydrolyse more easily.[4] Typically, an equilibrium between the imine and aldehyde is formed, which is dependent on the concentration of the relevant compounds and the pH of the solution.

Imines from terephthalaldehyde find use in the preparation of metal-organic coordination complexes. In addition, terepthaldehyde is a commonly used monomer in the production of imine polymers, also called polyimines.[5] It finds further use in the synthesis of covalent organic frameworks (COFs),[6] and It is used as a precursor for the preparation of paramagnetic microporous polymeric organic frameworks (POFs) through copolymerization with pyrrole, indole, and carbazole. Due to the characteristic metal-coordinating properties of imines, terephthalaldehyde finds common use in synthesis of molecular cages.[7]

Terephthalaldehyde is also a commonly used intermediate or starting material in the preparation of a broad variety of organic compounds, such as pharmaceuticals, dyes and fluorescent whitening agents.

[edit]

References

[edit]
  1. ^ "Terephthalaldehyde". pubchem.ncbi.nlm.nih.gov.
  2. ^ Snell, J. M.; Weissberger, A. (1940). "Terepthalaldehyde". Organic Syntheses. 20: 92. doi:10.15227/orgsyn.020.0092.
  3. ^ Schoustra, S. K.; Dijksman, J. A.; Zuilhof, H.; Smulders, M. M. J. (2021). "Molecular control over vitrimer-like mechanics – tuneable dynamic motifs based on the Hammett equation in polyimine materials". Chemical Science. 12 (1): 293–302. doi:10.1039/d0sc05458e. ISSN 2041-6520. PMC 8178953. PMID 34163597.
  4. ^ Schoustra, S.K.; Asadi, V.; Smulders, M.M.J. (2024). "Probing the Solubility of Imine-Based Covalent Adaptable Networks". ACS Appl. Polym. Mater. 4 (1): 79–89. doi:10.1021/acsapm.3c01472. PMC 10788871. PMID 38230365.
  5. ^ Taynton, Philip; Zhu, Chengpu; Loob, Samuel; Schoemaker, Richard; Pritchard, James; Jin, Yinghua; Zhang, Wei (2016). "Re-healable polyimine thermosets: polymer composition and moisture sensitivity". Polymer Chemistry. 7 (46): 7052–7056. doi:10.1039/c6py01395c.
  6. ^ Qu, Fei; Yan, Hang; Li, Kexin; You, JinMao; Han, Wenli (2020). "A covalent organic framework–MnO2 nanosheet system for determination of glutathione". Journal of Materials Science. 55 (23): 10022–10034. Bibcode:2020JMatS..5510022Q. doi:10.1007/s10853-020-04754-9. S2CID 218592879.
  7. ^ Belowich, Matthew E.; Stoddart, J. Fraser (2012). "Dynamic imine chemistry". Chem. Soc. Rev. 41 (6): 2003–2024. doi:10.1039/C2CS15305J. PMID 22310886.